Intec Products, Inc.
TECSIL® WOVEN TAPES
TECSIL® woven silica tapes retain strength and flexibility in insulation applications at 1800°F (982°C). When spiral wrapped over pipes, hoses or cables, they offer protection against molten metal or extreme radiant heat. TECSIL® is completely fireproof and with it's high silica (SiO2) content (96% minimum) it protects against contamination in high temperature environments. All TECSIL® tapes are available with pressure sensitive adhesive to facilitate wrapping installations. Upon exposure to the service temperatures that justify the selection of silica materials, the organic adhesive decomposes.
TECSIL® Tape Applications:
Silica tape insulation applications in ferrous and non-ferrous molten metals environments include cooling and fuel/hydraulic line hoses, heating elements, electrical cables and motor leads, and cooling water pipelines subjected to molten metal splash. A spiral wrap with TECSIL® tape insures against a failure due to extreme high soak temperatures or possible catastrophic excursion temperatures.
Vertical strip furnace curtains can be constructed with TECSIL® tape suspended in
a "mop-like" fashion to provide a thermal barrier between the outside shop
environment and the controlled temperature zones of the furnace interior, while
allowing penetration of the heat treated parts through the curtain with minimal
openings or exposure. Annealing furnaces and slot pre-heat furnaces are typical
applications for TECSIL® silica tape curtains.
TECSIL® Tape Products
|
PRODUCT CODE |
NOMINAL THICKNESS (INCHES) |
NOMINAL WIDTH (INCHES) |
| 13-613 | 1/16" | 1" |
| 13-617 | 1/16" | 1-1/2" |
| 13-619 | 1/16" | 2" |
| 13-621 | 1/16" | 3" |
| 13-623 | 1/16" | 4" |
| 13-626 | 1/16" | 6" |
| 13-628 | 1/16" | 8" |
| 14-613 | 1/8" | 1" |
| 14-617 | 1/8" | 1-1/2" |
| 14-619 | 1/8" | 2" |
| 02-621 | 1/8" | 3" |
| 02-623 | 1/8" | 4" |
| 02-626 | 1/8" | 6" |
| 02-628 | 1/8" | 8" |
| 15-613 | 1/4" | 7/8" |
| 15-617 | 1/4" | 1-3/8" |
| 15-619 | 1/4" | 1-7/8" |
| 15-621 | 1/4" | 2-3/4" |
| 15-623 | 1/4" | 3-3/4" |
| 15-626 | 1/4" | 5-3/4" |
PACKAGING
Standard spool sizes for TECSIL® tapes are 100 lineal feet for 1/16" thick tapes and 50 lineal feet for 1/8" and 1/4" thick tapes.
NOTE: Standard spool sizes in stock. Custom lengths available on request. Spool
length tolerance + or - 10%. Two pieces per spool allowed, minimum piece length
is 12 feet.
Intec Products, Inc.
1145 N. Grove Street Anaheim, CA 92806
Telephone: (714) 630-9192 Fax: (714) 630-9386 email:
intecproductsinc@aol.com
For your convenience Intec Products accepts Visa, Mastercard, American Express or Discover over the phone.
TECSIL®, Glasket® and Armortec® are registered trademarks of Intec Products, Inc.
Nextel is a registered trademark of 3M Ceramic Fiber Products.
The information provided on this website data bulletin is intended for general
information only. Information on data and application should not be construed as
a guarantee, expressed or implied, nor warranties or recommendations to use the
product in the infringement of any patent. Purchaser of the products described
herein are responsible for determining suitability for the intended application.